{"product_id":"maxxecu-gen-1-zf-8hp-wiring-harness-for-bmw-shifter","title":"MaxxECU Gen 1 ZF 8HP Wiring Harness for BMW Shifter","description":"\u003cp\u003e\u003cstrong\u003eMaxxECU Gen 1 ZF 8HP Wiring Harness for BMW Shifter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: 2287\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MaxxECU Gen 1 ZF 8HP wiring harness provides the transmission and shifter connections required to integrate a supported first-generation ZF 8HP automatic transmission with MaxxECU’s Gen 1 8HP CAN-control system.\u003c\/p\u003e\n\u003cp\u003eThis version is terminated for a supported BMW F-series 8HP electronic shifter with a 10-pin connector. It provides a substantially cleaner starting point than sourcing the transmission, shifter, diagnostic, CAN, power, and ground connections individually for a custom installation.\u003c\/p\u003e\n\u003cp\u003eThe harness connects the transmission and BMW shifter through a central GT150 interface and includes an OBD connector for future TCU flashing and tuning access.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Designed for MaxxECU-controlled Gen 1 ZF 8HP installations\u003cbr\u003e• Supports compatible Gen 1 ZF 8HP45, 8HP70, and 8HP90 transmissions\u003cbr\u003e• Terminated for a supported BMW F-series 8HP shifter with a 10-pin connector\u003cbr\u003e• Provides transmission, shifter, power, ground, and CAN wiring\u003cbr\u003e• Includes an OBD connector for future TCU flashing and tuning access\u003cbr\u003e• Approximately 1,800 mm between the BMW shifter connector and GT150 connector\u003cbr\u003e• Approximately 2,100 mm between the transmission connector and GT150 connector\u003cbr\u003e• Reduces custom connector sourcing and point-to-point transmission-harness fabrication\u003cbr\u003e• BMW-shifter alternative to the \u003cstrong\u003e2283\u003c\/strong\u003e Dodge-shifter harness\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• This harness is intended for supported \u003cstrong\u003eGen 1 ZF 8HP transmissions only\u003c\/strong\u003e.\u003cbr\u003e• MaxxECU currently lists support for selected Gen 1 8HP45, 8HP70, and 8HP90 transmissions.\u003cbr\u003e• The transmission’s original TCU must be reflashed with MaxxECU-compatible custom firmware using an external programming tool.\u003cbr\u003e• TCU programming hardware, rental, flashing service, and firmware preparation are not included with this harness.\u003cbr\u003e• This version is terminated for a compatible BMW F-series 8HP shifter using a 10-pin connector.\u003cbr\u003e• Product ID \u003cstrong\u003e2283\u003c\/strong\u003e is the corresponding harness terminated for a compatible Dodge 8HP shifter.\u003cbr\u003e• Another supported CAN shifter may be used, but the supplied BMW connector must be removed and replaced with the appropriate connector and wiring.\u003cbr\u003e• MaxxECU also supports shifter emulation and selected sequential-shifter configurations when properly configured.\u003cbr\u003e• The MaxxECU ECU, transmission, shifter, engine harness, programming tool, and transmission cooling system are not included.\u003cbr\u003e• This transmission harness does not replace the engine-management wiring harness.\u003cbr\u003e• Confirm the transmission generation, TCU hardware identifier, shifter part number, MaxxECU compatibility, and current wiring documentation before ordering.\u003cbr\u003e• Correct transmission main-power and wake-up sequencing is required for proper TCU initialization.\u003cbr\u003e• MaxxECU currently identifies its Gen 1 8HP control as \u003cstrong\u003eBETA\u003c\/strong\u003e functionality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEmissions and Competition-Use Notice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnless specifically identified as emissions-legal for the applicable vehicle and application, this product is intended for sanctioned competition, off-road, or other non-emissions-controlled use. Installation or use on an emissions-controlled vehicle operated on public roads may violate federal, state, or local law. The purchaser and installer are responsible for confirming and maintaining compliance with all applicable emissions and vehicle-use regulations.\u003c\/em\u003e\u003c\/p\u003e","brand":"MaxxECU","offers":[{"title":"Default Title","offer_id":46272480903225,"sku":null,"price":368.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/8512\/9017\/files\/2283--dodge_8hp_harness--01.jpg?v=1785695373","url":"https:\/\/rad-power.com\/products\/maxxecu-gen-1-zf-8hp-wiring-harness-for-bmw-shifter","provider":"RAD","version":"1.0","type":"link"}